STOCKYARDS
Stockyards
Magnus Sheep Yard Design
Yarding for cattle, sheep, horses and other animals along with cattle crushes, sheep handlers and more.
- Cattle Yards
- Sheep Yards
Sheep Yards
Magnus Sheep Yard Design
Select from one of many Magnus Sheepyard designs built from Standard Magnus Gates and Panels, Ramps, and Races to our design or modified to your design. For a quotation send us a rough sketch of the design you favour and we will compute the cost for you.
Portable/Towable Sheep Yards
Can be set up anywhere by one person.
- 20, 22 or 30 Panel Options
- Mesh, 6 Rail or 7 Rail Panels
- 10-Foot Blinded Race with three-way draft exit
- Strong Interlocking System Allows for Uneven Ground
- Holden HT Rims and Tyres
- Wheels Mounted on Drawbar so no Pneumatics or Jacks Required
Fixed Sheep Yards
Magnus designs or your own.
- 6 or 7 rail options
- Double flagged panels with 25 NB centre post
- End posts concreted 600mm in ground
- 25 NB gate frames on all gates
- Heavy duty gate hinges
- Free on-site quotes in South Australia
- Erection quotes available
- Manufactured using hi-tensile BHP steel
- Hinges and clamps supplied by Elgate
Sheepyard Ramps (Adjustable)
- Available from 9′ to 24 ‘ Long (Ground to 4th Deck)
- Mesh or Blinded Sides
- Hardwood Floor, Mesh Overlay
- Heavy Duty Jarrett Winch on Adjustable Ramps
- Optional Catwalks Available on Longer Ramps
Drafting Race
- Height 900mm
- Width 450mm
- 3.6m long. 3 way draft
- Fully galvanised
- Two blocking gates
- Straight sided or V-Draft options available
Bulk Feeders (18 Bag Sheep Feeder)
- This product is a larger feeder with a weatherproof cover. It’s an ideal ram feeder
- Manufactured without lid & weathershield for shed feeder, it comes equipped with an adjustable flow rate
- The heights of the stand vary according to the size of the animal to be fed
Cattle Yards
Magnus Cattle Yard Design
Fixed Cattle Yards
- Magnus designs or your own
- New yards or additions/repairs to existing yards
- Free on-site quotes in South Australia
- Double flagged panels set 600mm in concrete for maximum strength
- Erection quotes available
- Manufactured using hi-tensile BHP steel
- Hinges and clamps supplied by Elgate
Towable Adjustable Ramp
- 3.6m long
- Detachable A-Frame
- Adjustable for trailer and Truck
- Landcruiser Rims or similar to suit your vehicle
Standard Crush
- Fully Galvanised Construction
- Walkthrough Headbail
- Positive Action, Silent Closing Mechanism on Headbail – No Ratchet
- Gates on Both Sides of Crush
- Ratchet Anti-backing System
- Rear Sliding Gate with Nylon Rollers and Safety Latch
- Optional – Split Gate, Rear Close, Vet Access, Chin Bar and Baulk Gate
Portable/Towable Cattle Yards
Take your yard to the cattle.
- Strongly built, the yard includes ramp, headbail & 19 assorted panels
- Trailer incorporates pipe/rail cattle ramp with side kick plate
- Standard unit has approximately 50 steer holding capacity
- 50 mm ball coupling with safety chain
- Rugged trailer axle with 16″ wheels
- Trailer tilts for easy cattle access to ramp
- Stands to lock trailer into work position
Portable/Towable Cattle Yards
- 3.6m Towable ramp
- Hardwood Floor with RHS grip
- Detachable A Frame
- Standard Unit – 13 panels, 5 gates, 1 headbail and 1 sliding gate
- Works 25 Head
Cattle Race
- 2.6m long with sliding gate on one end
- 8 rails on sides and sliding gate
- Bolts onto concrete pad
- Ideal for weighing animals
Weigh Box
- 2.6m long
- Heavy duty galvanised steel construction
- Timber sides for EID compatibility
- 1.6mm galvanised sheet kickplates 600 mm high
- Optional sliding gate on front
Deluxe Cattle Ramp
- 3.6m incline with 1.5m platform
- Blinded to the fourth rail
- Fully blinded side optional
- Concrete or timber floor
- Cat walk
- Driver’s side gate for access to truck
Standard Adjustable Cattle Ramp
- 3.6m long
- 150 x 50 Creosote pine timber floor with RHS grips
- Bolts onto a concrete pad
- Height – adjustable for truck or trailer height or Deluxe adjustable (with winch)
- All ramps include 1.6 mm galvanised kick plates
- Blinded sides and catwalk available on request
Cattle Feeder
Cattle Feeder 8′ Specifications.
- 2.7m. wide x 2.0m. high x 2.5m. overall length
- All 1.6mm Galvabond with RSJ Skid base and lid frame work of 32mm square galv tubing
- 5.5 cubic m
- capacity in standard 2.5m
- feeder, normally about 3.5t of normal density feed (quantity varies with density of feed)
- Slides -to limit animals intake of food – whole oat rations, entire cracked grain etc.
Also available is a 4′ cattle feeder.
Hay Feeder
- 8’6″ x 5′ x 4′ high
- Keeps bale off the ground in wet conditions
- Suitable for round or large square bales